Workzone M1Y-DU10-190, Original Operating Instructions

Page: 12 / 28

• Store electric power tools not in use out of the reach of children. Do not allow persons not
familiar with the tool or persons who have not read these instructions to use the tool.
Electric power tools are dangerous in the hands of inexperienced people.
• Use the power tool, accessories, bits etc. in accordance with these instructions. Take the
working conditions and the work to be performed into consideration. Use of the power tool
for operations other than those intended could result in hazardous situations.
• Maintain the electric power tool with care. Check that moving parts are working perfectly
and not sticking, whether parts have broken or are so damaged that the operation of the
electric power tool is impaired. Have damaged parts repaired before using the tool. Many
accidents are caused by poorly maintained electric power tools.
• Keep cutting tools sharp and clean. Cutting tools that are looked after and have sharp
cutting edges are less likely to bind and are easier to control.
• Only have your power tool serviced by a qualified specialist and use only original spare parts.
This will ensure that the safety of the power tool is maintained.
• Never hold the workpiece being sawn in your hands or across your leg. Secure the workpiece
to a stable platform. It is important to support the workpiece properly to minimize the risk of
body contact, blade binding or loss of control.
• Hold the power tool only by the insulated gripping surfaces when performing an operation
where the cutting tool can cut hidden wiring or its own power cable. Contact with a live wire
will make the metal parts of the power tool live too and cause an electric shock.
• Do not reach underneath the workpiece. The guard cannot protect you from the blade
underneath the workpiece.
• Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth height
should be visible beneath the workpiece.
5)Service
Sawing
6
Safety instructions for saws
The saw blade cannot injure your hands if you are using both of them to hold the
circular saw.
WARNING Keep your hands away from the cutting area and the blade. Keep your
second hand on the auxiliary handle or motor housing.
M1Y-DU10-190 / 90704
After Sale support
0845 872 2740
GB
019022605
IRL
www.sumecservicecentre.co.uk