Using the saw
22
GB
22
IRE
AFTER SALES SUPPORT
GB
IRE
0190 226 05
0190 472 0501
CAUTION!
Risk of injury!
While using the saw, sharp splinters may be ejected from the work
piece.
− Always connect the saw to a dust extraction device.
To attach the dust extraction adapter, proceed as follows:
1. Attach the vacuum adapter
22
to the sawdust outlet
14
(see
figure D).
2. Connect a suction hose
23
(not included) from the dust extraction device to the
vacuum adapter or directly to the sawdust outlet
Using the saw
CAUTION!
Risk of injury!
The saw can unintentionally start and cause injury.
− Disconnect the saw from the mains before adjusting or changing anything on the saw.
Adjusting the parallel fence
To adjust the parallel fence, proceed as follows:
1. Loosen the parallel fence locking knob
7
slide the parallel fence
9
to the de-
sired measurement.
2. Re-tighten the parallel fence locking knob.
Adjusting the mitre gauge cutting angle
The precise cutting angle can be set with the help of the mitre gauge. To adjust the
mitre gauge, proceed as follows:
1. Loosen the mitre angle locking knob
6
and select the desired bevel angle indi-
cated by the marks on the mitre scale
5
.
2. Re-tighten the mitre angle locking knob firmly.
