Operations
12
Using the trolley
− Hold the handle with both hands and then push the trolley forward.
− Press the locking levers
5
on the two swivel castors to lock the trolley (see
fig. D
).
Extending the load platform
NOTICE!
Risk of damage!
Only use the trolley with the load platform fully closed or
extended.
− Always secure the load platform with the security clamp to
prevent unintended opening or closing.
1. Disengage the security clamp
10
by lifting it up and turning it
approximately 90° (see step 1 in
fig. E
).
It should rest on the horizontal brace of the trolley.
2. Pull the front and rear load platform sections apart until the horizontal
braces meet (see step 2 in
fig. E
).
3. Re-engage the security clamp by turning it another 90° so that it overlaps
the two horizontal braces (see step 3 in
fig. E
).
To close the extended load platform, disengage the security
clamp, then push the front and rear load platform sections
together and finally re-engage the security clamp.
Closing the trolley
To close the trolley:
1. Press the rear guard
2
and handle
1
downward (see step 1 in
fig. F
).
2. Press the rear guard downward again and push the rear guard and handle
assembly forward until it closes (see step 2 in
fig. F
).
The trolley is now closed (see step 3 in
fig. F
).
Summary of Contents for AET14
Page 3: ...3 A 1 2 4 5 6 7 8 9 3...
Page 4: ...4 B C 4 6 D 1 2 5...
Page 5: ...5 E F 1 2 3 1 2 3 10...