![Workzone 55903 User Manual Download Page 16](http://html.mh-extra.com/html/workzone/55903/55903_user-manual_997511016.webp)
14
1866 902 9690
AFTER SALES SUPPORT
Cordless Reciprocating Saw · 20V Lithium-Ion Battery
3 Change the position of the pivot shoe
a) Loosen the two cap screws at the bottom of
the front handle with the hex key provided.
(Fig. 4)
b) Move the pivot shoe (2) in or out to the
position required.
c) Tighten both cap screws.
Operation
1 Turn on/off the reciprocating saw
a) The reciprocating saw is equipped with a lock
button (3) which reduces the possibility of
accidental starting.
The lock button (3) is located on the handle
above the on/off switch trigger.
You must depress the lock button in order to
pull the switch trigger.
The lock button resets each time the trigger is
released.
b) To turn on the reciprocating saw, depress the lock button (3) and pull the ON/OFF switch
trigger (4).
c) Release the ON/OFF switch trigger to turn off the reciprocating saw.
d) The speed of the reciprocating saw can be increased by increasing the pressure on the
ON/OFF switch trigger.
Decrease the pressure on the ON/OFF switch trigger will decrease the speed of the
reciprocating saw.
2 General cutting
a) Hold the reciprocating saw firmly.
b) Make sure that the workpiece is held securely.
c) Turn on the reciprocating saw, place the pivot shoe against the workpiece, then cut the
workpiece slowly. Do not force.
d) Use only enough pressure to keep the saw cutting. Use of excessive pressure will break the
blade by bending and twisting.
Fig. 4
Operation
Fig. 5
Fig. 4