5. BB200 SDK CONTROL GUI APPLICATION
5.2.1 Connect bu on
The connect bu on is used to connect the Workswell BB200 to your control applica on. You cannot control more
than one BB200 device at the same me. A er clicking the connect bu on the port selec on window appears.
If you have your BB200 already connected you can disconnect it by clicking the Disconnect bu on.
5.2.1.1 Port selec on window
In the port selec on window there is a list of available ports (both USB-C and RS485). A er choosing and con-
firming the corresponding port, the program will a empt the connec on to the BB200 device.
Figure 5.2 – Port selec on window
5.2.1.2 Refresh bu on
With the Refresh bu on the list of available ports is updated. This bu on should be used in case when a port is
not present on the available ports list.
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 1.6.2 EN, 7
th
Jun, 2021
All pictures are only for illustra on.
Real values may vary.
8
