Wheels, Tires, Tubes, and Wheel Parts
(Alloy wheels include stainless steel spokes and zinc-plated brass nipples.)
Add “KVPR” to the wheel part number that you need to upgrade to Kevlar Tires and Puncture Resistant tubes!
Part #
Description
Part #
Description
4131Q
26” Front Wheel w/ Air Tire
77
26” Front Drum Brake Wheel w/ Air Tire
4131QA
26” Front Wheel w/o Tire
77A
26” Front Drum Brake Wheel w/o Tire
4131QS
26” Front Wheel w/ Solid Tire
77S
26” Front Drum Brake Wheel w/ Solid Tire
4131QAAL
26” Alloy Front Wheel w/o Tire
77CAR
26” Alloy Front Drum Brake Wheel
4136
26” Rear Coaster Brake Wheel w/ Air Tire
7208Q
20” Front Low Gravity Wheel w/ Air Tire
4136A
26” Rear Coaster Brake Wheel w/o Tire
7208QA
20” Front Low Gravity Wheel w/o Tire
4136S
26” Rear Coaster Brake Wheel w/ Solid Tire
7208SQ
20” Front Low Gravity Wheel w/ Solid Tire
4136ASS
26” Alloy Rear Coaster Brake Wheel
SMX262CB
26” 2 Spd Kickback Rear Coaster Brk Whl
77R
26” Rear Drum Brake Wheel w/ Air Tire
SMX262CBAL 26” Alloy 2 Spd Kickback Rear CB Wheel
77RA
26” Rear Drum Brake Wheel w/o Tire
SMX263CB
26” 3 Spd Rear Coaster Brake Wheel
77RS
26” Rear Drum Brake Wheel w/ Solid Tire
SMX263CBAL 26” Alloy 3 Spd Rear Coaster Brake Wheel
77RCAR
26” Alloy Rear Drum Brake Wheel
SMX267CB
26” 7 Speed Rear Coaster Brake Wheel
SS721
Coaster Brake Repair Kit (internal parts)
SMX267CBAL 26” Alloy 7 Spd Rear Coaster Brk Wheel
300
Coaster Brake Hub (36 hole x .120”)
401
3 Speed Coaster Brake Hub (36 x .120”)
4922-372
26” x 2.35” Fat Frank™ Tire - Cream
4922-376
26” x 2.35” Fat Frank™ Tire - Brown
4922
20” x 2.125” Tire (Low Gravity Front)
4922A
26” x 2.125” Tire
4922KV
20” x 2.125” Kevlar Tire
4922AKV
26” x 2.125” Kevlar Tire
4922WSW
20” x 2.125” White Wall Tire
4922AWSW
26” x 2.125” White Wall Tire
4938A
20” Solid Tire
4939
26” Solid Tire
4923
20” x 2.125” Tube
4923A
26” x 2.125” Tube
6023
20” x 2.125” Puncture Resistant Tube
6023A
26” x 2.125” Puncture Resistant Tube
1014E
Spokes / Nipples for 20” Wheel (Min. 36)
1014A
Spokes / Nipples for 26” Wheels (Min. 36)
1015
20” x 2.125” WTC Clincher Rim (Chrome)
1016
26” x 2.125” WTC Clincher Rim (Chrome)
1017A
20” Rimstrip
1016A
26” x 2.125” WTC Clincher Rim (Alloy)
1018
Valve Cap
1017
26” Rimstrip
SS12N-1
Shimano Nexus Shifter Cable & Shifter
SS01
Axle Nut (Rear Shimano Coaster Brake)
Safety and Comfort Accessories
Part #
Description
Part #
Description
3979
Ding Dong Chime Bell
303
Squeeze Bulb Horn (chrome w/ rubber)
3973
Mega-Horn (battery operated)
201
Cable and Lock set (with keyed padlock)
4963
Rear View Mirror (Chrome, rectangular)
5030B
Reflector Kit w/ Brackets
3978
Safety Flag on Pole
P19
Bicycle Helmet
101710
Flashing Strobe Light (clear lens)
101714
Flashing Strobe Light (red lens)
7217-41197
Pedals with Velcro Foot Straps (pair)
3975
Generator Light Set
1006
Air Foot Pump
1000
Spoke Wrench
202
Mini-Frame Pump w/ Attachment Strap
2000
Chain Rivet Remover Tool
1265TW
Crank Cone Wrench
95021
Water Bottle w/ Cage, Attachment Strap
1001
Pedal Wrench
7917A
Backrest w/ Mounting Hardware
6001A
Patch Kit (5)
3976
Battery Operated Headlight
7217GS12
“Glowspeck” Flashing Pedals – Flash without batteries when you pedal!
A
SSEMBLY
I
NSTRUCTIONS FOR
W
ORKSMAN
H
EAVY
-D
UTY
B
ICYCLES
:
(F
OR
L
OW
-G
RAVITY
B
IKES
,
SEE
ADDITIONAL
ASSEMBLY SHEET
.)
Please read this manual carefully prior to performing the simple finishing assembly and prior to riding. We recommend that a qualified bicycle mechanic
assemble this cycle. Carefully remove the bicycle from the carton. You will notice the bicycle is mostly pre-assembled at the factory.
TO ATTACH FRONT FORK/WHEEL ASSEMBLY TO THE FRAME:
(If you have a front drum brake, proceed to Headset instructions.)
1) Attach front fender to fork.
2) Slide one axle washer over axle bolt. Insert axle through basket leg (optional), fender brace, and retention clip.
3) Insert axle through front wheel hub and out other side. Install retention clip, fender brace, basket leg (if
ordered), washer, and axle nut.
Headset:
1) Grease headset cups (48) with Rustolene 200 or equal. Bearings (49) are pre-greased at the factory, but it is
wise to add lubrication before assembly.
2) Place one headset bearing (49) onto fork steerer tube with balls facing up. Slide steerer tube into frame.
3) Place the other bearing on top of fork tube with balls facing down towards the cup (#48), which is already pressed onto the frame.
4) Install top-adjusting cone (52) onto treaded fork steering tube. Hand-tighten, making sure bearings do not bind. Turn back ¼ turn.
5) Install fork key washer (53) and reflector bracket on top of the adjusting cone with tip of washer in slot on steering tube.
6) Install head lock nut (54) and securely tighten. Make sure that the fork rotates freely without being loose. Excess play or resistance
must be adjusted. Failure to adjust properly can lead to improper steering response.
7) Install handlebar stem (55A) into the fork steering tube with the handlebar clamp facing forward. The stem must be inserted far enough
to reach the minimum insertion line. Tighten the stem bolt slightly at this point. Loosen the handlebar clamp nut and slide the handlebar
through the clamp, centering the knurled center section of the handlebar into the clamp.
8) Position the handlebar to the desired angle and tighten clamp securely. Recommended torque is 300 IN. LBS. Adjust the handlebar
rotation so that it is straight with the front wheel. Tighten stem bolt securely. Recommended torque 240 IN. LBS. Be sure not to over
tighten, as damage to the parts may occur causing steering failure.
9) If a drum brake was ordered, attach brake lever to handlebar Make sure brake cable is not tangled in any way.
