9
DRUM/CADDY ASSEMBLY (continued)
WET/DRY VAC ASSEMBLY
1.
Position the powerhead assembly on
the drum/caddy assembly as shown
(assembled earlier).
2.
Rotate both latches down and press
until you hear them snap over the
flanges on the drum.
Drum
Latch
Drum
Latch
Drum
Flange
Latch
Drum
Powerhead
Assembly
Insert Hose
Insert the push button end of the Dual-Flex™
Locking hose into the inlet of the Vac. The
hose should snap into place. To remove the
hose from the Vac, press the release button in
the hose assembly and pull the hose out of the
Vac inlet, as shown.
Release
Button
Press
and
Pull
Accessory Bag Snaps
Accessory
Bag Straps
(4)
Handle
Installing Accessory Bag
Install accessory bag as shown with
extension wand holders facing unit.
SP6852-1 Workshop 14 Gallon:SP6439-3_ES.qxd 8/26/13 11:55 AM Page 9
