12
OPERATION (continued)
1.
The Vac comes equipped with a drain
for easy emptying of liquids. Simply
unscrew the drain cap and lift the
opposite side slightly to empty the
drum.
2.
Another option is to remove the drum
from the Vac.
3.
Pull the drum out from the Vac by
pulling down and sliding the drum on
the axle support under the drum.
4.
Dump the drum contents into the
proper waste disposal container.
5.
Replace the drum by reinserting into
the cavity and push until it snaps into
place.
WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before emptying
the drum.
WARNING: To reduce the risk of
back injury or falls, do not lift a Vac
heavy with liquid or debris. Scoop
or drain enough contents out to
make the Vac light enough to lift
comfortably.
Emptying the Drum
!
!
Axle
Support
Dust
Drum
Drain
Pull Down and
Slide Dust Drum
Out of Wet/Dry
Vac Unit
SP6854-1 WS1100CA0 Workshop :SP6439-3_ES.qxd 9/26/13 3:31 PM Page 12
