5
8
All equipment is potentially hazardous. There is no substitute for a cautious, safe-minded operator who
recognizes potential hazards and follows reasonable safety practices.
When the use of hand tools is required to perform any part of assembly, installation, adjustment, maintaining,
repairing, removal, or moving the implement, be sure the tools used are designed and recommended by the
tool manufacturer for that specific task.
Personal protection equipment including safety glasses, safety shoes, and gloves are recommended during
assembly, installation, operation, adjustment, maintaining, repairing, removal, or moving of the implement.
Always use two people to handle heavy, unwieldy components during assembly, installation, removal, or
moving of the implement.
Never place any part of your body where it would be in danger if movement should occur during assembly,
installation, operation, maintaining, repairing, removal, or moving the implement.
Never place yourself between the tractor or ATV and implement while implement is in operation.
Do not work under a raised implement unless it is securely blocked or held in position.
Never wrap rope around hand or any part of your body. Injury could occur.
Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating equipment.
Consult your doctor about operating tractor and implement while taking prescription medications.
Do not allow others to ride on the tractor or ATV with an operator. Riders are subject to injury such as being
struck by foreign objects or being thrown off. Riders obstruct the operator’s view resulting in unsafe operation.
Never allow anyone to ride on the implement!
Before you operate any implement, check over all pins, bolts and connections to be sure all are securely in
place. Replace any damaged or worn parts immediately.
Do not allow anyone who is not familiar with the safety rules and operation instructions to use this equipment.
Never allow children to operate or be around equipment.
Do not exceed capacity of the tractor or ATV.
Keep alert and watch the front as well as the rear when working with implements.
When maneuvering close to buildings or passing through narrow areas, be sure to allow sufficient clearance
for the implement and power unit.
SAFETY INSTRUCTIONS
(continued)
SAFETY SIGNS
PART NO. 101170
Summary of Contents for PBX-42
Page 9: ...8 SAFETY SIGNS PART NO 101170...
Page 13: ...12 PLR LANDSCAPE RAKE PBX 42 BOX SCRAPER PARTS LIST...
Page 14: ...13...
