background image

 

 

 

 

 

 

 

CAUTION 

THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD 

BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OWNER’S 

MANUAL

 

MODEL NO. 

HK-305 

 

 CAUTION 

For Operation 

Read Rules And 

Instructions Carefully 

STATEMENT 

OF POLICY 

   It is the policy of 

Worksaver,

Inc

. to improve its products 

where it is possible and 
practical to do so.  

Worksaver,

Inc

. reserves the right to make 

changes or improvements in 
design and construction at any 
time without incurring the 
obligation to make these 
changes on previously 
manufactured units. 

Packing 
Assembly & Mounting 
Operating Instructions 

Maintenance 
Repair Parts

 

3 PT. HITCH ADAPTER KIT 

HK-305 

For A.C. Models 

WD & WD45 Tractors

 

 

1.  Select an area for assembly that is clean and free 

of any debris, which might cause persons 
working on the assembly to trip. 

2.  Do not lift heavy parts or assemblies. Use crane, 

jack, tackle, fork trucks or other mechanical 
devices. 

3.  Preview the assembly instructions in your 

operator’s manual before proceeding further. 

4.  If the assembly instructions call for parts or 

assemblies to be blocked up, use only blocking 
material that is in good condition and is capable 
of handling the weight of the assembly to be 
blocked. Also insure that the blocking material is 
on a clean, dry surface. 

5.  Never put hands, or any other part of body under 

blocked up assemblies if at all possible. 

6.  After completing assembly, thoroughly inspect 

the machine to be sure that all nuts, bolts, 
hydraulic fittings or any other fastened 
assemblie s have been thoroughly tightened. 

7.  Before operating the machine, thoroughly read 

the operation section of your operator’s 
manual. 

8.  Before operation, read the maintenance section 

of your operator’s manual to be sure that any 
parts requiring lubrication such as gearboxes 
are full to avoid any possible damage. 

9. 

Before operating equipment. If you have 
any questions regarding the proper 
assembly or operation, contact your 
Worksaver dealer or representative.

 

WORKSAVER, INC. 

P.O BOX 100, LITCHFIELD, IL. 62056-100 

Phone: 217-324-5973   Fax: 217-324-3356    

E-Mail: 

[email protected]

          Web Site: www.worksaver.com 

 

 

Summary of Contents for HK-305







Reviews: