2
WorkRite Ergonomics | 800.959.9675 www.workriteergo.com
Assembly Instructions for Sierra Tool Bar and Privacy Panel
#1500128 - Rev A
2
3
Attach Tool Bar to Worksurface
Thread Set Screws into bottom of Stanchions until screw is visible. Slide Tool Bar onto back of
worksurface. For two-leg tables, Tool Bars are designed to fit so that Stanchions align with center
of table legs. For three-leg tables, Tool Bars are designed to fit so that outside Stanchion aligns
with center of outside table leg.
Place one washer between the bottom of the worksurface and the Stanchion, resting it on the top
of the Set Screw. Tighten the Set Screw with the M5 Allen wrench provided. Repeat on other side.
D
Attach Accessories
Attach Sierra Accessories to Tool Bar with the hook facing downward.
Ins ert the hook into the groove of the Tool Bar and then push down.
a
b
a
b
E
C
3500127: Stanchion cap, Sierra Silver
3500128: Stanchion cap, Charcoal
4200109: Sierra Tool Bar Hardware kit
Replacement Part Numbers
Align
center of table leg
to center of stanchion.
