Workrite Ergonomics | 800.959.9675 www.workriteergo.com
3 of 9
1
Attach Brackets to Legs
1.1 Attach Short Brackets (B) using #M6 × 14 mm Flat Head Cap
Screws (F) to both legs.
1.2 Attach Left End Bracket (C) and Right End Bracket (D) to sides
of the Leg (A) using #M6 × 14 mm Flat Head Cap Screws (F).
Not
e: The Right End Bracket will be on your left
and vice versa when the assembly is seen upside
down.
Tighten securely.
✓
Verify that you have all the tools needed for the assembly
You will need the following tools:
#2 tip Phillips screwdriver or drill/driver
#3 tip Phillips screwdriver or drill/driver
M4 tip bit or 4 mm Allen Wrench (E)
If you do not have a Workrite worksurface, you will also need:
⅛" pilot drill bit
3/32" pilot drill bit
or
B
B
B
B
D
C
F
F
F
F
F
F
To avoid stripping the threads, always
insert and make the first few turns
of the screw BY HAND with an Allen
wrench (E), ensuring it is in straight.
Left Leg
Right Leg
Right End Bracket
Left End Bracket
front
1.1
1.1
1.1
1.1
1.2
1.2
A
A
E
F
#M6 × 14 mm Flat Head
Cap Screw
Hardware at actual size
Caution!
Only use the #M6 × 14 mm Flat Head
Cap Screw (F) for assembly.
