6
Workrite Ergonomics 800.959.9675 www.workriteergo.com
Workrite Sequoia Monitor Arm - Assembly Instructions
Make Adjustments & Secure Cables
5
Monitor Tilt & Swivel Adjustments
Depending on the size of your monitor, it may be necessary to
adjust the tilt and swivel setting.
If the monitor doesn’t hold its tilt position or is too hard to tilt,
adjust the tension adjustment on top of the Monitor Mount. Use the
2.5mm Hex Wrench (I), clockwise to increase lift, counter-clockwise
to decrease lift. Check the monitor, and adjust again as necessary.
a
Vertical adjustments is made by using the Ratchet Lever (D). You
may need to re-position the Collar (C) to lower or raise the Center
VESA Mount.
Guide monitor and power cables over and around
Ratchet Levers and Wing Knobs then through the
Cable Manager (B).
b
c
Vertical Adjustment with
Ratchet Lever & Collar
I
J
K
B
C
D
&
