3 of 4
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Adjusting Pivot Tension (Black Bolts)
Carefully remove Pivot Cover Cap (D) at joint.
Setting Tension
If the arm is loose, turn the black adjustment
screw clockwise using a 5 mm Allen Wrench
(included with base) until the arm is tight and
pivots smoothly.
If the arm is tight and does not pivot, turn the
black adjustment screw counter-clockwise until
the arm pivots smoothly.
Locking Tension
Tighten the set screw with 2.5 mm Allen wrench
(included with base) to lock in the tension
level and prevent the joints from loosening or
tightening with use.
Replace Pivot Cover Cap (D) by snapping into top
of arm assembly.
Tighten
Loosen
c
c
4
b
a
Front
b
Shown on
C-Clamp Base
a
d
d
D
Remove
Replace
