1 of 2
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Attach the Single Pole Mount Adaptor to Selected Pole Option
Place the Single Pole Mount Adaptor on
selected pole option, at your desired
monitor height.
Tighten the clamp screw on the Single
Pole Mount Adaptor (C) with 5 mm Allen
Wrench, included with base, to secure
Adaptor to Pole.
C
Single Pole Mount Adaptor
(includes Spacer for Static Arm)
Qty: 1
A
Articulating Arm Bolt
M8 x 80 mm
Qty: 1
B
Articulating Arm Spacer
Qty: 1
Parts Included
Assembly & Installation Instructions:
Single Pole Mount Adaptor CONF-ADPT-SPM-S
Required Parts Sold Separately
Tools Required
Conform Monitor Arm.
Selected Pole Base option with mounting hardware.
Do not use on hollow core tables.
Do not rotate or suspend arm (s) beyond table surface.
Do not exceed 48 lb.
Phillips head screwdriver, 2.5 mm Allen Wrench, 5 mm
Allen Wrench.
1
a
a
b
b
C
14" Pole shown
clamp screw
