4 of 4
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Attach the Flat Extension Arm continued.
Place the Arm on Pin. Assemble the Bolt and Washers as shown. Tighten with 5 mm Allen Wrench (included with
base). Be sure the arm is tight but rotates freely. Snap on the Pivot Cover Cap. Tighten the installed set screw
with a 2.5 mm Allen Wrench (included with base).
If 3 arms are mounted in series, the maximum monitor weight
in the entire system must not exceed 27 lb.
Do not link more than 3 arms in series.
2
f
f
f
A
A
#1500259 Rev A
M8 × 65 mm
Static Arm Bolt
M8 × 80 mm
Articulating Arm Bolt
