2 of 7
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Attach Arms to Dual Arm Adaptor & Pole
Remove Bolt and washers from Pin Assembly (B).
Insert the Pin into the Dual Pole Mount Adaptor (D) then place the 30 × 7 mm Spacer (C) on the Pin.
Place the Static Arm (A) on the Pin resting on the Spacer (C).
Re-assemble the Bolt and Washers as shown.
Tighten with 5 mm Allen Wrench (included with base). Be sure the arm is tight but rotates freely.
Repeat for other arm.
Replace the top Cable Management Clip
and then add the Center Monitor Mount
to the pole. You may need to loosen the
Tension Screw prior to adding.
Tighten the Tension Screw on Single Pole
Mount Adaptor with 5 mm Allen Wrench
to secure Arm Assembly to Pole.
2
c
c
d
d
e
e
f
g
g
h
f
a
a
b
b
D
C
C
A
A
Center Monitor
Mount
Remove
Replace
Pin
Cable
Management
Clip
h
Tension
screw
