1 of 7
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Selected base option with mounting hardware.
#2 Phillips head screwdriver
2.5 mm Allen wrench (included with base)
4 mm Allen wrench (included with base)
5 mm Allen wrench (included with base)
Do not use on hollow core tables.
Do not rotate or suspend arm beyond table surface.
Do not exceed 16 lb. per arm.
Assembly & Installation Instructions:
Conform Triple Static Arms CONF-3SDS-WOPB-S
A
Conform Static Arm Assemblies
Qty: 3
Parts Included
Required Parts Sold Separately
Tools Required
Attach Dual Pole Mount
Adaptor to selected pole option
Remove the top Cable Management Clip.
Place the Dual Pole Mount Adaptor (D) on selected
pole option at your desired monitor height.
Tighten the tension screw on Dual Pole Mount
Adaptor (D) with 5 mm Allen Wrench (included
with base) to secure Adaptor to Pole.
D
Dual Pole Mount
Adaptor
Qty: 1
G
Wedge Washer
Qty: 2
H
Pivot Cover Cap
Qty: 2
I
Hook & Loop Strips
Qty: 8
B
Pin Assembly with
Bolt and Washer
Qty: 2
C
30 × 7 mm Spacer
Qty: 2
E
M4 × 10 VESA Mount Screw
Qty: 12
F
M4 × 6 VESA Mount Screw
Qty: 12
1
a
a
b
c
b
c
D
14" Pole Base shown
Cable
Management
Clip
Tension
screw
Left
Right
Center
