PAGE 4
User Manual PCA 120 USB
RPT
SD USB
VOL
VOL
REC
SD MMC
DIGITAL AUDIO PLAYER /RECORDER
RPT
SD USB
VOL
VOL
REC
To navigate between folders and files.
Allows volume adjustment of the file playing.
Switch on /off the interface.
Select the audio source (USB port or SD card slot).
Repeat function.
Play/Pause.
USB/SD INTERFACE
This interface allows to play MP3/WMA files from USB port or SD card slot. Changing the source only requires
pushing one button. The information is shown in the LCD display, allowing navigation through folders and files. It
incorporates volume control and REPEAT function.
The interface includes a recorder function, allowing to save the mixing information or messages into SD card
or USB driver.
NOTE: It is only possible to play or record using one USB or SD device at a time. Therefore it is
not possible to play a file from the USB port and to record the mix on the SD card. Therefore,
first select the operation (PLAY or REC) and after select the media (SD or USB) to record to.
NOTE: The maximum SD card or USB memory capacity is 32 GB.
NOTE: This interface provides 3 REPEAT modes (showed in the LCD):
: Repeats the playing track.
: Repeats all tracks.
REP : Plays all tracks in random mode.
NOTE: During PLAY mode, push these buttons in order to change to the next or previous
folder (depending on the button pushed).
Record function. Allows recording of audio tracks, such as
from the audio inputs on to
a USB or SD device.
1. Press “REC” button. “
REC
” will be showed on the LCD.
2. Press “REC” button again. “
REC
” will flash for 3 seconds. The LCD will then display a counter
showing the incrementing record time in seconds.
The unit incorporates a 1 second delay in order to take time before recording.
3. When you want to finish the recording, press the button.
4. The track displayed will be stored in the “
FRE
” folder (This is shown as the “RECORD” folder
when reading the device through a PC).
messages,
OPERATION
- When you insert the USB or SD device, the interface reads the folders and tracks, showing the total number of
each one. for example, “
F02, 006
" means 2 folders and 6 tracks in total.
- The folders are named with incrementing numbers according to the alphabetic order of the folders inserted in
the device. The folder created when tracks are recorded is named as “
FRE
”
1
ALL
REP
REP
EN