If caster assembly fits loose,
using a screwdriver, slightly
spread apart split bearing on
shaft. If caster fits tight, crimp
split bearing slightly with
pliers.Make only slight
adjustments, until caster fits
properly.
1
Ensure all components are present. If any components are missing, do not proceed with assembly. Contact
Brands customer services at [email protected]
ASSEMBLY
REMOVE THE 4 SCREWS
ON BOTTOM
4
HANDLE ASSEMBLY
2
REMOVE SIDE PANEL
Remove screws with a
screwdriver.
Remove screws with a
screwdriver.
5
CASTER ASSEMBLY
3
REMOVE CHEST
Place cabinet on a level
surface. Slowly remove chest
from the cabinet.
6
UNLOCK OR LOCK
THE DRAWERS OF THE
TOOL CHEST
Distributed by:
GREATSTAR INDUSTRIAL USA, LLC
9836 Northcross Center Court, Suite A,
Huntersville NC 28078, USA
www.greatstartools.com
WORKPRO
