ADDITIONAL SAFETY INSTRUCTIONS FOR THE CHARGER
• Your Workpro tool with Lithium Ion batteries may only be charged with the specific designed
Workpro Lithium Ion battery charger purchased with the tool. IT IS DANGEROUS TO USE
ANY OTHER BATTERY CHARGER TO CHARGE YOUR TOOL. Do not attempt to charge
the battery pack with any other charger than the one supplied.
• Before using the charger, read all the instructions, labels and cautionary markings on the
charger and battery pack as well as the instructions on using the battery pack.
• Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise
damaged in anyway. Take the charger to an authorised service centre for a check or repair.
• Do not disassemble the charger. Opening or removing covers may expose you to danger-
ous voltages or other risks. Incorrect reassembly can cause electric shock when you use
the tool or charger again. Take the charger to a power tool repair centre when service or
repair is required. Incorrect re-assembly may result in the risk of fire, electric shock or
electrocution. To reduce the risk of electric shock, do not disassemble any part of the
product.
•
DANGER.
If the battery pack is cracked or damaged in any other way, do not insert it in the
charger
• Do not plug anything other than your Workpro tool into the charger, as other objects may
touch dangerous voltage points or short out parts, which could result in fire or electric shock.
• Do not place the tool or charger on an uneven surface, as a fall may cause serious damage.
• Never place the tool or charger near or over a heat source such as a radiator or heater.
• Do not operate the charger in a cabinet or other enclosure unless proper ventilation is provid-
ed.
• Use the battery charger indoors only.
•
WARNING.
Do not allow any liquid to come into contact with the charger. There is a danger
of electric shock. Do not position the tool or battery charger near water; for example, near a
sink, wash bowl or toilet. Do not spill liquid of any kind on the tool or charger. Doing so may
short out parts, Causing damage to the product and creating the risk of fire or electric shock.
• To reduce the risk of an electric shock, unplug the charger from the power supply before
attempting to clean it. To clean tool or charger, wipe with a damp cloth. Use of any other
cleaners is not recommended.
• Do not place any object on to, or allow anything to rest on the charger.
• Make sure that the charger cable is positioned where it will not be stepped on, tripped over or
otherwise subjected to damage or stress. Keep the lead away from operating machinery.
• Do not pull on the lead of the charger to disconnect it from the mains power socket.
• Do not use an extension cord unless it is absolutely necessary. The use of an improper
extension cord could cause the risk of fire, electric shock or electrocution.
• Never attempt to connect two chargers together.
• Do not charge batteries or use the tool and battery pack in locations where the temperature
may be below 40°F or exceed 104°F such as alongside sheds or metal structures.
• The battery can be charged or operated at temperatures between 40° F and 104° F.
NEVER CHARGE YOU LITHIUM ION BATTERY BELOW OR ABOVE TEMPERATURES
RECOMMENDED OTHERWISE FIRE OR SERIOUS DAMAGE TO THE BATTERY PACK
MAY OCCUR.
6