SAFETY INFORMATION
WARNING!
SAFE OPERATION AND USE
To reduce the risk of personal injury, user must read and understand operator's manual.
Do not stand on sawhorse.Do not stack sawhorses to obtain extra height.
Do not overload, maximum capacity 1500 lbs per unit sawhorse.
Use only on a flat, dry, hard and level surface.
Do not use as a step ladder or standing platform.
Ensure work area is well lighted while working.
Ensure all 4 legs have solid contact with the floor. If the sawhorse is not positioned level and straight, loads
placed upon it could fall, potentially causing damage to the item(s) loaded on it, and possible severe personal
injury.
Ensure the load placed on any sawhorse does not exceed the applicable safe working load rating. Overloading
can lead to failure of the sawhorse, potentially causing damage to the item(s) loaded on it, and possible severe
personal injury or death.
OPERATING INSTRUCTIONS
CUSTOMER SERVICE
If you are having difficultly using this product and require support, please contact service @greatstartools.com
STEP 1:
Sawhorse in folded/carry position.
1
STEP 2:
Press release button and pull down legs
until the supports are fully opened.
2
STEP 3:
Separate legs and push cross brace flat.
3
STEP 6:
2x4 support arms that transform 2
sawhorses into a solid jobsite table.
6
STEP 4:
Repeat step 2 & step 3 to open
another leg.
4
STEP 5:
Legs adjust in increments about
1 inch. To extend, pull legs down
until latch is locked at desired
position. To retract, press lock
button and push leg back.
5