Workhorse ATV 25BL, Assembly / Operation Instructions / Parts

Page: 3 / 8

PSE-PRECISION SPRAY EQUIPMENT
®
, a divison of Green Leaf, Inc. 9490 N BALDWIN ST FONTANET, IN 47851 www.green-leaf.us 800-654-9808
a division of Green Leaf, Inc
®
P R E C I S I O N S P R AY E Q U I P M E N T
PSE
®
®
Assembly Instructions
PARTS LIST
DESCRIPTION PART NUMBER QTY ITEM
25 Gallon Tank 600132 1 1
Tank Lid 600133 1 2
Tank Lid Tether 600134 1 3
ATV Boom Mount 600189 3 4
ATV Helix Lever 600190 3 5
5/16-18 x 3/4 FLT Head Screw 600188 6 6
Drain Cap Assembly 600298 1 7
Deluxe Spray Wand and 15ft Hose 600156 1 8
Spray Wand Clip 600151 2 9
#10-24 x 3/8 Screw 600152 2 10
Lead Wire Assy. w/ Switch (96") 600153 1 11
ATV Angle Bracket 600191 1 12
Assembly Instructions
1.0--Install ATV Boom Mounts & ATV Helix Lever
on bottom of tank as illustrated using 5/16"
Flat Head Screws. Note the the orientation
of all parts as their orientation is essent a i l
for proper assembly.
1.1--Install Drain Cap Assembly
1.2--Slide ATV Angle Bracket into Center ATV
Boom Mount and Slide Rotate Lever to lock
into position.
1.3--Insert Lead Wire Assembly into plug at rear
of the pump.
1.4--Join the red wire of the two wire cabel to a +12v
source such as a switch, ammeter, or positive
battery post. The black wire should be grounded
or connected to the negative battery post
2
3
11
1
7
66
4
66
4
5
4
66
9
10
8
12