3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
5
Assembly
Start with the four leveling feet. Screw the jam nut down
until it contacts the top of the foot.
Screw the leveling feet into the bottom of the legs, as
shown.
Remove the translucent back splash panel from the Wash-It
sink base.
After installing the leveling feet to the legs, invert the
wash sink base. Place one of the legs in a corner of the
wash base with the smooth side facing out as shown.
Loosely fasten the leg using a bolt, lock washer and nut.
