Workhorse Products SUPER SECA, Owner'S Manual

Page: 9 / 16

9
800.778.8779 | WORKHORSEPRODUCTS.COM
ASSEMBLY
STEP 3: INSTALLING THE INNER TUBE AND TOP PLATE
ONTO HEATING ELEMENT
TOOLS NEEDED PARTS NEEDED
Silver Hex Bolt
Shaft Collar
8 x Mounting Screws
Shaft Collar Wrench
Heating Element •
•
•
•
•
Phillips Head
Screwdriver
Place the heating element
onto a table. Then stack
the assembled inner tube
and top plate onto the
element, while aligning
the holes.
Place the silver hex bolt under
the top plate into the open
middle hole. The end of the
bolt needs to be exposed on
top. Screw the handle onto
the exposed thread.
Place eight mounting
screws into every hole
except for the very top
middle hole.
Install the shaft collar and
shaft collar wrench onto
the lower tube. Then adjust
the height of the flash
to desired position, and
tighten collar to shaft.
With a Philips screwdriver
tighten the screws slowly.
DO NOT over tighten them.
•
1.
4.
2.
5.
3.