10
3730 E. SOUTHERN AVE., PHOENIX, AZ 85040 | USA
EXPOSURE TIMER
There are five setting displays on the timer face:
The center character is a letter:
S for seconds
M for minutes
H for hours
For example:
01M10 = 1 minute and 10 seconds
18S00 = 18 seconds
04S50 = 4.5 seconds
The two digits to the
right of the letters are
for fractions of units
The two digits to
the left of the letters
are for whole units
To adjust the digits press the buttons located directly over and under each digit. The top button
increases the number, whereas the bottom button decreases it.
When the Lumitron is powered on for the first time that day, the timer will count up from zero to
the set point. For every exposure afterwards, just simply turn off the light rocker switch and turn
back on. This will start the LED lights and begin the count down again.
