4
7. Before riding, make sure that the stand is properly retracted - it is not in contact with the
ground.
DISASSEMBLY
During disassembly, proceed in the opposite way to assembly.
MAINTENANCE
Bearings
: As the scooter is equipped with high quality ball bearings, there is no need for special
maintenance of the bearings. Ball bearings are only cleaned from the outside. If the bearings become
dirty, they can be cleaned when changing the wheels with a cotton cloth. The bearing housing should
be protected against dirt.
Wheels
: To replace the wheels, unscrew the Allen screw (size 5) and remove the wheel. We
recommend replacing the bearings when replacing the wheels. Insert the bearings into the new wheels
- don't forget to place the center spacer - and fasten the wheels with Allen screws. Tighten the Allen
screws properly.
For safety reasons, perform regular maintenance on all components (if necessary lubricate bearings,
replace wheels, etc.).
Regular maintenance increases the safety of your scooter. Carry out regular checks on the tightening
of the lock nuts and all fasteners. Replace the part if it is worn or damaged.
Do not make any modifications to the scooter that are not recommended by the manufacturer.
ENVIRONMENT PROTECTION
After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the
local laws and environmentally friendly in the nearest scrapyard.
By proper disposal you will protect the environment and natural sources. Moreover, you can help
protect human health. If you are not sure in correct disposing, ask local authorities to avoid law
violation or sanctions.
TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated here under determine Warranty Coverage and Warranty Claim
Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 89/2012 Coll. Civil
Code, and Act No. 634/1992 Coll., Consumer Protection, as amended, also in cases that are not
specified by these Warranty rules.
