WR 4200 /1
–
WR 4200 /2
MANUAL DE USUARIO
VERSION 1.0
WR 4200
www.workpro.es
7
Receiver (SETTING)
IR synchronism
Hold the transmitter (handheld microphone or bodypack) with the IR port pointed toward the
receiver’s IR
port in a distance between 5-20 cm.
Press “SET” button on the receiver one time. The LCD shows
IA
on the LCD, wait 4 or 5 seconds, the
transmitter will synchronize to the same frequency marked in the receiver.
NOTE: When using multiple systems, synchronization must be done one at a time.
Automatic frequency
Press SET two times. The dot 1 will blink. The LCD shows
SCAN
.Press UP or DOWN button. The receiver will try
to find any free frequency.
Manual frequency
Press SET three times. The dot 1 and frequency value will
blink. Press UP or DOWN to change the frequency manually.
Sensitivity
Press SET four times. The dot 1 and sensitivity value will blink.
Press the UP or DOWN button to change the SQ level from 0
to 9.
ID set
Function disabled
Lock set
Press and hold DOWN button and press SET, the lock set will
be activated showing a “
lock
”
symbol in the display. It cannot do any operation except power on/off.
