Work Pro WCR - 35, User Manual

Page: 8 / 25

Page 6
Reference Manual
[3] RANGE switch
Crossover frequencies from 80 to 900 Hz or 800 Hz to 9 kHz respectively are chosen by the
RANGE switch.
[4] LF /MF/ HF GAIN control
[5] LF/MF/HFMUTE switch
[6] MODE switch
[7] MONO BASS switch
Each band has it's own LF/HF GAIN ( +6 dB ) control to allow some fine-tuning of the system to
give(usually) a flatter frequency response.
The MUTE button enables easy auditioning of theselectedband(s).
Stereo3-way ormono5-wayoperationis chosen by the MODE switch.
Instereo mode thebass outputs may be summed in mono viathe MONO BASS switch.
REAR PANEL
[1] MAINS CONNECTOR / FUSEHOLDER / VOLTAGE SELECTOR
[2] HIGH / MID/LOWOUTPUTS
WCR 35
[3] INPUTS
Before you connect theunit, pleasemakesurethatthedisplayedvoltagecorresponds to your
mains supply.
Please note that the AC voltage selectionis defined bythe position of the selector holder. If you
intendto changethe operating voltage,move
the voltage selector switch to up or down. Matching the two markers monitors the selected
voltage.
Please note that, depending on themains voltage supplied totheunit, the correct fusetype and
ratemustbeinstalled.
Please use the enclosedmains cableto connect theunit tothemainspower supply.
Your provides 6 outputs for stereo and 5 for mono operation.
Inputsare electronically balanced (2 for stereo, 1 formonooperation).
Once againtwo legending stripesrefer to stereo3-way (top) and mono 5-way operation
(bottom) respectively. In mono 5-way operation
certain inputs andoutputs do not apply, andarenot legended.
[1]
[2]
[3]
Rear Panel