ENGLISH
4
Delete all Scenes
BANK
PROGRAM
Bank Copy
BANK
MIDI / REC
MUSIC/BANK COPY
Programming Chase
MIDI / REC
MUSIC/BANK COPY
CHASE BUTTONS 1-6
BANK
Program a bank of scenes into a Chase
This function will reset all DMX channel to 0 output.
1 . With the power off, press and hold down the Program and
Bank Down buttons at a time.
2 . Apply power again, all scenes should be cleared.
1 . Program enable.
2 . Tap the Bank Up/Down button to select the bank you wish
to copy.
3 . Tap the MIDI/Rec button.
4 . Tap the Bank Up/Doown button to select the bank you wish
copy to.
5 . Tap the Music/Bank Copy button, all LEDs and the Segment
Display will flash three times briefly indicating the function
has been completed.
6 . Press the Program button for three seconds to exit
Programming mode.
You must program scenes before you can program chases, this
function allows you to store up to 240 scenes into one chase.
1 . Program enable.
2 . Tap the Chase button to select the chase to program. Each
time you can select a chase only.
3 . Select a desired scene from the bank that has stored
scenes.(described in Programming Scenes).
4 . Tap the MIDI/Rec button.
5 . Repeat steps 3-4 until you've reached your desired effect.
You may record up to 240 scenes into a chase.
1 . Program enable.
MIDI / Rec Copy
2 . Select the chase using Chase buttons 1-6.
3 . Use Bank Up/Down button to select the bank that contains
the scenes you wish to copy.
4 . Tap the Music/Bank Copy button.
5 . Tap the MIDI/Rec Copy button, all LEDs and the Segment
Display button causing a highlight next to STEP, the first digit
in the Segment Display shows the chase and the next three
digits show its step.