•
STEP
/
MIX
/
SEQ button:
To activate the “STEP” function or switch between the Mix mode and the Sequence mode.
•
TAP SYNC button:
Repeatedly tap this button to establish different chase rate.
•
AUDIO button:
Used to activate audio sync of chase rate or set a scene at audio effect.
•
GROUP button:
To select more fixtures while holding down this button simultaneously.
•
BLACKOUT button:
Press this button to enable or disable relevant DMX output. When its LED is lit, that
means relevant DMX output is disabled. Press this button again the LED will be “off”, that
means the DMX output is reactivated.
•
SETUP button:
Press this button for about 3 seconds to access the SETUP menu.
•
FOG MACHINE button:
This button is used to control the Fog machine. Relevant LED will show you the different
working states( HEATING or READY
).
•
DEL button:
Press this button to delete relevant Scenes or Chases.
•
RECORD button:
Press and hold down this button for about 5 seconds to access the Scene/Chase mode,
and also use this button to record Scenes or Chases.
•
ESC button:
To cancel relevant operation or to exit.
•
UP/DOWN buttons:
To select or adjust desired item or level during operation.
•
CH.PAGE button:
Press this button to switch between Ch1-8 and Ch9-16. LED “off ” means 1-8 channels
available, while LED “on “ means 9-16 channels available.
•
FINE button:
Use this button can adjust relevant level finely by a small margin .
•
“
∧∨ ＜
＞
” buttons:
Used to adjust PAN
/
TILT movement.
•
Joystick:
Used to control and adjust relevant level more conveniently through the Pan or Tilt
movement.
•
STANDBY button:
Press this button to enable or disable relevant output of PARs. Its function is similar to the
BLACKOUT button.
•
FADE
＋
SPEED button:
To select FADE TIME or NO FADE TIME.
5
