3
User Manual/Manual de Uso MMX 65
8. MONO/STEREO
. Push this button in order to select the audio type (MONO or STEREO).
9. BALANCE
. This knob controls the mix of stereo audio available from the channel. Move to the Left
or Right to select the L/R level. This knob incorporates central point.
10. LEVEL INDICATOR
. This vumeter with LED shows the output level. Pay attention to the red LED
for audio peaks.
11. ZONE EQ
. 3 tone equalizer (Bass, Mid, Treble) with central point in order to equalizer the output
signal.
NOTE: Controls 7, 8, 9, 10 and 11 are present in ZONE A and ZONE B outputs.
12. HEADPHONE GAIN
. This knob controls the gain of the headphones connected in headphone
input
(13)
.
13. HEADPHONES
. Jack 1/4" connector which allows to connect a headphones for monitor.
REAR PANEL
R
65
Use only with a 250V fuse
1
2
8
3
4
5
7 6
9
11
13
12
14
15
16
10
1. TALKOVER THRESHOLD
. Determines the point in which auto-talkover activates. The more sensitivity
adjustment you need to speak into your microphone to activate auto-talkover.
2. TALKOVER ATTENUATION
. Sets the front panel MIC 1 to automatically reduce other source level
when the mic is used. Positions are available for either OFF, -12 dB and -40 dB (complete reduction)
3 - 8. MIC INPUT
. Allows connection XLR3 mic (MIC 2 and MIC 3 respectively)
4 - 7. PHANTOM SELECTOR
. This switch allows to select ON position if you want to connect a condenser
microphone in MIC 2 or MIC 3.
5 - 6. LINE INPUT
. Use these terminal blocks to connect LINE level signal (channel 2 or 3 respectively).
9. PHONO/LINE SELECTOR
. This switch allows to select the audio level applied on channel 4 (LINE
level or PHONO level)
10. UNBALANCED LINE INPUTS
. To connect stereo audio from LINE devices like CD players, VCRs,
etc. in channels 4 (Line or Phono), 5, 6 and 7.
EN
EN