REAR PANEL
SIDE PANEL
Use only with a 250V fuse
Use only with a 250V fuse
Use only with a 250V fuse
DC 24V
DC 24V
0.5A
1
3
4
1
8
9
5
6
7
2
1. MIC 1 TALKOVER
- This trimmer adjusts the threshold TALKOVER of MIC 1 for priority purpose.
2. MONO INPUT SOURCE
- It allows to select the source type on each mono input channel (MIC, LINE
or PH). In this last position, the device provides phantom power to supply a condenser microphone
( +18V - 20V DC).
3. MONO INPUT CONNECTOR
- This combi connector (XLR 3 pin /Jack 1/4" allows to connect a LINE
or MIC device (selecting the correct source with switch (2)).
4. STEREO INPUT CONNECTORS
- It is possible to connect stereo input signal through these unbalanced
RCA connectors.
5. REC OUTPUT
- It is possible to send the complete mising information to an external recording device
through these unbalanced RCA connectors.
6. MONO OUTPUT
- This balanced mono output through XLR 3 pin connector allows to send signal to
p.e. a subwoofer system.
7. L & R MASTER OUTPUT
- These balanced LEFT & RIGHT outputs through XLR 3 pin connectors
allows to send the final mix to and external amplifier system.
8. 24 V DC
- For emergency purpose, it is possible to supply the device through these 24 V DC terminal
with an external DC power supply.
9. AC INPUT CONNECTOR
- Connect the included IEC cable in order to supply the device.
1. AC SELECTOR
- Use this selector switch to choose the correct AC voltage value. Please confirm
the correct value before to connect the device.
3
User Manual/Manual de Uso MMX 62
EN
EN
