MINO 15
A
ACTIVE LOUDSPEAKER
MINO 15 A
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1-Remote IN:
Allows the connection of an external volume control
2-Clip led:
It lights up when the applied signal reaches to distortion. Reduce the input level in order to
eliminate the distortion.
3-Signal led:
It lights up when input signal is detected
4-Phantom led:
It lights up when Phantom Power is enabled
5-Mode:
It allows to choose between 3 diferent presets.
6-Bass:
It allows to choose between 3 diferent presets.
7-Volume:
It allows to control the audio level for Mic Input.
8-Phantom Switch:
It allows enable or disable power Phantom
9-Talkover switch:
It allows enable o disable Talkover function, also select between two different
thresholds
10-Mic IN:
XLR3 pin connector. It allows to connect a microphone.
11-Power IN
12-Front Led Switch:
unused
13-Treble:
These knob setup the tone level for high frequencies.
14-Bass:
These knob setup the tone level for low frequencies.
15-Master:
It allows to control the overall level of entire amplifier.
16-RCA Line IN:
It allows to connect a line level device through RCA connector.
17-Config switch:
It allows to take the preprocessed signal.
19-XLR3 IN:
It allows to connect a line level device through XLR3 connector.
20-Line Link:
It allows to send audio to other devices.
21-Power Switch:
It allows to turn Off/On the unit.
