4
User Manual/Manual de Uso DCA 1
EN
4. SETUP VIA SOFTWARE
DCA 1
incorporates several features that must be configured using the frontal encoder. This encoder allow to navigate
through menus rotating it clockwise and counter-clockwise and confirming each value pushing it.
0_1:000 1
0_2:000 3
1.-VOLUME(0-100)
CH1:083 CH2:099
2.-PRIORITY MENU
SETUP (push)
This is an example of the initial windows where:
0_1:
Indicates OUTPUT 1,
000
indicates the volume on this output and
1
(in that case), the input source
assignet to OUTPUT 1.
0_2:
Indicates OUTPUT 2,
000
indicates the volume on this output and
3
(in that case), the input source
assignet to OUTPUT 2.
Now, push the encoder to enter in the menus system.
1. OUTPUT VOLUME
2. PRIORITY MENU
It is possible to configure the volume on each output separately. Pushing the encoder, the symbol
:
beside
CH1
will blink indicating the possibility to change the volume in OUTPUT 1. Turn the encoder clockwise to increase the
volume or counter-clockwise to reduce it. when reach the correct value, push the encoder, the symbol
:
beside
CH2
will blink to change this value. After to confirm this second value, turn the encoder to pass to next menu.
Push the encoder to enter in the PRIORITY sub-menus
