Multi Tool
INTENDED USE
The machine is intended for sawing and cutting wooden materials, plastic, gypsum, non-ferrous metals and
fastening elements (e. g., unhardened nails, staples). It is also suitable for working soft wall tiles, as well as for
dry sanding and scraping of small surfaces. It is especially suitable for working close to edges and for flush
cutting.
TECHNICAL SPECIFICATIONS
PRODUCT ELEMENTS
1.
Quick clamp lever
2.
On/Off switch
3.
Thumbwheel for orbit frequency preselection
4.
Adapter for tool holder
5.
Clamping bolt
6.
Hex key
7.
Plunge saw blade
8.
Scraper
9.
Sanding plate
10.
Sanding sheet
11.
Dust extraction
12.
Retaining clip of the dust extraction
13.
Felt ring of the dust extraction
SAFETY
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
•
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
•
Use the machine only for dry sanding. Penetration of water into the machine increases the risk of an
electric shock.
•
Caution, fire hazard! Avoid overheating the object being sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable conditions, e. g., when sparks emit from sanding
metals, sanding debris in the dust bag, micro filter or paper sack (or in the filter sack or filter of the
vacuum cleaner) can self-ignite. Particularly when mixed with remainders of varnish, polyurethane or
other chemical materials and when the sanding debris is hot after long periods of working.
•
Keep hands away from the sawing range. Do not reach under the workpiece. Contact with the saw blade
can lead to injuries.
•
Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility
company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas
line can lead to explosion. Penetrating a water line causes property damage or may cause an electric
shock.
•
When working with the machine, always hold it firmly with both hands and provide for a secure stance.
The power tool is guided more secure with both hands.
•
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than
by hand.
•
Wear protective gloves when changing application tools/accessories. Application tools/accessories
become hot after prolonged usage.
•
Do not scrape wetted materials (e.g. wallpaper) or on moist surfaces. Penetration of water into the
machine increases the risk of an electric shock.
•
Do not treat the surface to be worked with solvent-containing fluids. Materials being warmed up by the
scraping can cause toxic vapours to develop.
•
Exercise extreme caution when handling the scraper. The accessory is very sharp; danger of injury.
•
Products sold in GB only: Your product is fitted with a BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should
have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains socket elsewhere.
