Worcraft DS08-180, Instruction Manual

Page: 42 / 46

Drywall Sander
IN INTENDED USE
The machine is designed for sanding drywalls, ceilings and walls of the inner and outer surfaces, clearing the floor residues,
paint coatings, adhesive and loose plaster etc.
Our machine is not suitable for processing the object containing asbestos.
TECHNICAL SPECIFICATIONS
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However,if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Read the manual.
Wear eye protection
Wear gloves Wear a mask In dusty conditions
Electrical appliances must not be
disposed of with the domestic waste. Protection class II
PRODUCT ELEMENTS
1 Sanding sheet 2 Sanding pad (not show)
3 Dust bag 4 Speed adjustment knob
5 Switch lock-on button 6 Soft handle
7 Side handle 8 Cable
9 Dust hose 10 Suction power adjusting wheel
11 Main switch 12 LED switch
13 LED belt light
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
●
Keep work area clean and well lit. Cluttered or dark
areasinvite accidents.
●
Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases ordust.
Power tools create sparks which may ignite the dust or
fumes.
●
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
●
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
●
Avoid body contact with earthed or grounded surfaces,