CORDLESS ORBITAL SANDER
IN
INTENDED USE
Depending on the sandpaper being used, this appliance is suitable for the dry sanding of wood, plastic, metal, filler and also
painted surfaces. Any other usage or modification of the appliance is deemed to be improper and carries a significant risk of
accidents. The manufacturer accepts no responsibility for damage(s) resulting from improper usage. This appliance is not
intended for commercial use.
TECHNICAL SPECIFICATIONS
Type / model: CFS-S20Li (JD512620)
Applicable battery pack
CLB-S20Li-2.0 / CLB-S20Li-4.0
Voltage
20VDC
Sound pressure level
LpA:77.8dB (A),K=3
dB (A)
Rated speed
13000/min
Sound power level
LwA: 88.8 dB (A), , K=3 dB (A)
Sanding pad
90x187mm
Vibration
ah=5,45m/s
2
,K=1.5m/s
2
Insulation class
III
Weight (without battery pack)
1.2kg
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Read the manual.
Wear ear protection.
Wear eye protection
Wear breathing protection
Electrical appliances must not be
disposed of with the domestic waste.
Protection class III
PRODUCT ELEMENTS (see fig.1)
1
ON / OFF switch
5
Dust collect bag
2
Front handle
6
Sanding plate
3
Rear handle
7
Clamp
4
Battery pack
8
Sanding sheet
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The ter
m “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated (cordless)
power tool.
Work area safety
●
Keep work area clean and well lit. Cluttered or dark areasinvite
accidents.
●
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases ordust. Power tools
create sparks which may ignite the dust or fumes.
●
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Electrical safety
●
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
●
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
●
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
