Worcraft CEP-S20LiB, Instruction Manual

Page: 44 / 59

CORDLESS PLANER
INTENDED USE
The device is suitable for planing wood in the form of beams or boards or the like if the workpiece is held securely in a fixed
position. The device is also suitable for chamfering edges and for rabbeting.
The equipment is designed for use by adults. Young people under the age of 16 are permitted to use the equipment only under
supervision. The manufacturer shall not be liable for damages caused by use other than for the intended purpose or by
incorrect operation.
DELIVERY SCOPE ( Fig 1)
Dear customer,
Thank you very much for your choosing our products. Please check that the article is complete as specified in the scope of
delivery. If parts are missing, please contact our service center or the sales outlet.
Item No. Item Description Quantity Item No. Item Description Quantity
1 Planer Tool body 1 5 Bolt 1
2 Parallel guide fence 1 6 L-bracket 1
3 Screw knob 2 7 Spanner & hex wrench 1+1
4 Screw nut 1
Danger! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts.
There is a danger of swallowing or suffocating!
TECHNICAL SPECIFICATIONS
Model CEP-S20Li (WT6012) Rabbet cutting depth Max. 12mm
Voltage 20Vd.c. Recommended battery CLB-20V-4.0/ CLB-20V-4.0H
Drive wheel speed 15000 /min Sound pressure level LpA=84dB(A), K=3 dB(A)
Cutting width 82mm Sound power level LwA=95dB(A), K=3 dB(A)
Max. Cutting depth 2mm Vibration emission ah=5,22m/s
2
,K=1,5m/s
2
Base size 79x284mm Weight (without battery) 2.5kg
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Disassemble the battery pack before maintenance.
Read the manual. Wear working gloves.
Wear eye protection Wear ear protection
Wear breathing protection Compliance with the relevant requirements of EU
directives).
Electrical appliances must not be
disposed of with the domestic waste. Do not use the machine in the rain or eave it
outdoors when it is raining.
PRODUCT ELEMENTS (Fig. 2)
1 Switch interlock knob 9 Left dust exhaust port 17 Screw knob
2 Dust port shift knob 10 Spanner compartment 18 Rear footpate
3 Screw knob 11 Belt cover 19 Cutting drum assy.
4 L-bracket 12 Parallel guide fence 20 Blade
5 Bolt 13 Cutting depth adjustment knob 21 Locking nut
6 Screw nut 14 Right dust exhaust 22 Chamfering groove