Worcraft PROFESSIONAL CSG-S20Li, Instruction Manual

Page: 51 / 62

the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
●
Avoid body contact with earthed or grounded surfaces, such
as pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is earthed or
grounded.
●
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
●
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges and moving parts. Damaged or
entangled cords increase the risk of electric shock.
●
When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
●
If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of
an RCD reduces the risk of electric shock.
Personal safety
●
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result
in serious personal injury.
●
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
●
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/or
battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
●
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
●
Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.
●
Dress properly. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.
●
If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.
Power tool use and care
●
Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
●
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
●
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
●
Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
●
Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
●
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
●
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of
the power tool for operations different from those intended
could result in a hazardous situation.
Service
●
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Safety Warnings for Spray guns
●
Keep area clean well, lit and free of paint or solvent
containers, rags, and other flammable materials.
Spontaneous combustion may occur. Fire extinguisher
equipment shall be present and working at all times.
●
Provide for good ventilation in the spraying area and
for sufficient fresh air in the complete room.
Evaporating inflammable solvents create an explosive
environment.
●
Do not spray and clean with materials that have a
flash point of less than 55
°C. Use materials based on
water, non-volatile hydrocarbons or similar materials.
Volatile evaporating solvents create an explosive
environment.
●
Do not spray in the vicininty of ignition sources,
such as static electricity sparks, open flames, pilot
lights, hot objects, engines/motors, cigarettes and
sparks from plugging in or unplugging power cords
or operating switches.
Such spark sources can ignite
the spraying vicinity/ environment.
●
Do not spray any liquid of unknown hazard
potential. Unknown materials can create hazardous
conditions.
●
Wear additional protective equipment such as
appropriate protective gloves and protective masks or
respirators when spraying or handling chemicals.
Wearing protective equipment for the appropriate
conditions reduces the exposure to hazardous
substances.
●
Be aware of possible hazards from the spray
material. Observe the information on drums/tanks/tins
as well as manufacturer information of the spray
material, including the request to wear personal
protective equipment
. The manufacturer's instructions
are to be observed in order to reduce the risk of fire as
well as injuries caused through toxins, carcinogens, etc.
● Supervise children. This will ensure that children do
not play with the fine-spray system.
●
This fine-spray system can be used by children aged
8 or older and by persons who have physical, sensory
or mental limitations or a lack of experience or
knowledge if they have been supervised or instructed
in the safe operation of the fine-spray system and
understand the associated dangers.
Otherwise, there is
a danger of operating errors and injuries.
●
Children must not be allowed to clean and perform
maintenance on the fine-spray system without
supervision.