8. Press confirm button in the Woox home app.
9. The app will now search for the device and
register is to your account.
Installation
1. Make sure the indoor siren is in the range of
Zigbee gateway's signal. Effective range testing:
short press the reset buton of indoor siren after
connected to gateway. If the indicator light is
flashing, it means that the sos button
communicate effectively with the Zigbee gateway.
2. Remove the mounting bracket from the body of
doorbell by pullingit down.
3. Mark the position of the mounting holes on the
wall using the mounting bracket as a template.
Drill out the mounting holes taking care to avoid
any joists, electrical cables or water/gas pipes that
may be hidden beneath the surface.
4. Once the holes have been drilled out insert the
rawl plugs into the holes and fix the wall plate to
the wall using the correct mounting screws
provided.
5. Placing the body of the siren on the wall plate.
Support
If you need further help or have comments or
suggestions please visit www.wooxhome.com
English
3
