background image

 12 

  

Riding the bike cont. 

Your bike features 7 speed Shimano index shifting gears which are changed using the thumb selector on 
the right side of the handlebars. When the thumb stick is fully extended, the bike is in first gear (the easi-
est to pedal). To move up through the gears press the black (+) button as shown. 

To move back down the gears, simply push/extend the thumb selector again, one gear at a time. 

Remember to select a lower gear when approaching junctions and before climbing hills. 

You should change the gears one at a time, waiting until the gear is properly engaged before 
changing to the next gear. 

 

Motor Care—

Important

 

The motor on your bike is very good, but you do need to take proper care to ensure it lasts. 

You need to ensure you are in the correct for any given situation. You should drop to a low gear when ap-
proaching junctions so that your are in the correct gear when you need to start moving again. A higher 
gear when starting-off will put too much stress on the motor and will shorten the life of the unit. 

Likewise, on hills, you should bear in mind the stress the motor is under and select a sensible gear accord-
ingly (1st or 2nd gear), do not try to climb hills in the highest gears.  

Summary of Contents for Krieger 2017


















Reviews: