9
4.2. Frame
woom-frames are made of high quality aluminum tubes that are optimized for keep balance
easily. This is made possible by the frame structure allowing for an upright sitting position
and the standard built-in
steering limiter of the woom 1, 1 PLUS, 2 and 3.
In the event that your bike is stolen, and for insurance matters, you
should make a note of the frame serial number. The
frame number
clearly identifi es your bicycle (woom 2–6). You can fi nd this number
at the lower end of the seat tube (see picture).
Frame serial number:
4.3. Steering system – handlebar
The steering system consists of the handlebar, the handlebar stem and the headset.
The headset holds the fork in the frame, and allows for easy turning of the handlebars. It is
exposed to heavy loads during the ride, and therefore needs to fi t properly. It must not
have any play and must be able to turn easily.
The ahead-stem used for the woom bike is the connecting piece between the headset and
the handlebar.
1. Hex screw at the lower end
of the stem: by loosening
this screw you can adjust the
handlebar at a right angle to
the front wheel set. Make
sure that the wheel is not
installed the wrong way
around– the brakes have to
be located in front of the
fork.
2. Hex screw on the front part of the stem: it allows the handlebar to turn on its own
axis (woom 1–3).
3. Hex screws on the Vario clamps: they allow the handlebar to turn on its own axis
(woom 4–6).
Rahmen Nr.
Frame Nr.
1
3
1
2
Summary of Contents for WOOM
Page 1: ...Bicycle owner s manual Version 09 2018 woom...
Page 2: ......
