10
2.2.3- Inserting the reserve parachute
Bring the bridle passage zipper slider to its Lycra pocket, which is located at the top of the harness behind the neck.
Open the zipper starting from the closing flap so as to achieve free passage of the bridle between the loop and the parachute. After having connected the
reserve to the harness with one of the previously described systems.
Introduce a thin rope (paragliding line type) into each elastic loop which you will use to help close the container.
Insert the elastic loops in the corresponding pockets and through the small eyelets. Insert the parachute in the harness container with rescue handle facing
upwards and rescue parachute lines facing the harness tail. Complete the process by inserting the handle into the corresponding housing.
Close the large black plastic flap using the cord and block the elastic loop using the longest pin, having it pass first through the hole just under the handle
insertion, then in the elastic loop and finally in the hole located after the elastic strap. Then remove the thin cord.
