81 | UM-PP-EN-03
emergency stop switch magnet has been positioned and that the runner has fixed clip with pull-cord
correctly.
In manual operation there is a [+][-] button on the start screen where the reverse direction must be
activated. Subsequently,
“FORWARD”
or
“REVERSE”
appears in the display. After that, the treadmill
speed can be increased using the [+] button and decreased using the [-] button.
Fig. 46 Manual operation with WOODWAY Treadmill Control Software
For more information, see the separate operating instructions for the WOODWAY Treadmill Control
Software.
7.11
Body Weight Support Systems
Depending on the
patient’s
illness or physical/mental limitations, it may be necessary to use a body
weight support system for the treadmill therapy in motor rehabilitation.
For more information, see the separate operating manual for the LokoStation Body Weight Support
System.
For information on the use of body weight support systems please contact your local WOODWAY
dealer or Service Center.
ATTENTION
When using the body weight support system, PPS Series treadmills
must be equipped with an additional brake (retrofitting possible).
It should be noted that the braking behavior changes due to the
additional brake, i.e. the braking performance is slightly "harder". One
must become accustomed to the changed braking behavior.
