66 |
U M - P S - E N - 0 0
HDHomerun Setup
To set up the HDHomerun you must download
HDHomeRun Software
. The software can be
found at the following link:
https://www.silicondust.com/support/downloads/
If you need more detailed instructions on installation and setup refer to the documentation
provided with your SiliconDust product.
1.
After installing
HDHomeRun,
open
HDHomeRun Setup.
This is a full list of devices found
on your network.
Note:
HDHomeRun Setup will NOT find devices on anything other than the local subnet.
The “Device Input” column corresponds to a number listed on the bottom of your HDHomerun
Extend unit.
2.
Click on the hyperlink for each device will open the web interface for the device selected.
The web interface is where the network connection information can be found including
the IP Address, Subnet Mask, MAC Address, etc.
3.
Take note of the
IP Address
as it will be used to point the ProSmart at the SiliconDust
box.
NOTE
For stability purposes, it is
HIGHLY
recommended that a DHCP Reservation is
made for each SiliconDust device on the network. The SiliconDust device does
not support Static IP addressing.
