Accessing Web Interface
44
01/2019-v1.0en
7.3
Connecting a ProSmart to a Network
Fig. 68 Connecting a ProSmart to a Network 1
-
Go to
Settings
(Password:
8020
).
Fig. 69 Connecting a ProSmart to a Network 2
-
Select the
Network tab
.
-
If using wired network connection, see Section
page
-
If using wireless network connection, see
7.3.1
Wired Network Settings
WOODWAY recommends wired networks when using the ProSmart console. Perfor-
mance and reliability of a wired network is better than a wireless one.
To use a wired network first make sure the treadmill has an Ethernet cable going to
the Ethernet port in the front right of the treadmill.
NOTE
By default, the
Address Type will be DHCP. DHCP means that the network
equipment will assign an IP address to the treadmill. The
Static option is only
used if a Network Administrator has assigned a specific IP address to the de-
vice.