Woodwarm Stoves Phoenix 3, Installation, Servicing & User Instructions, Page: 4 / 33

GB & IE
4
1. General Notes
This Woodwarm gas appliance is a High Efficiency, Live Fuel Effect appliance. It provides radiant and convected
heat using the latest burner technology.
Before Installation, check that the local distribution conditions, nature of the gas and pressure, and adjustment of
the appliance are compatible.
This appliance is intended for use on a gas installation with a governed meter.
This Gas Installation may only be installed by a registered professional competent person (Gas Safe installer in
the UK) . The installation must adhere to the requirements of the local and national Building regulations and
national standards. The installation manual must also be followed.
Ensure that the Flue Terminal is not in any way obstructed and is clear of vegetation, i.e. trees, shrubs etc. and
that no objects are leant against the terminal or guard.
Always clean the Window Panel before the fire is ignited. Any finger prints must be removed, as these will be burnt
into the glass and will be un-removable.
Do not operate this appliance if the glass panel has been broken (or cracked), removed or is open.
The appliance is designed to fit numerous installation situations as listed in these installation instructions. However
only flue approved by Woodwarm for this appliance may be used.
This appliance is rated below 6.9kW, and as such needs no additional ventilation. However an adequate supply of
fresh air to maintain temperatures and a comfortable environment is recommended.
This appliance is designed as a heating appliance, and as such will get very hot in operation; all surfaces (except
the controls and access door) are considered to be working surfaces and as such should not be touched. The front
windows and surrounds are not considered to be fully secure guards against accidental contact. It is recommended
that an approved fire screen be used if children, the elderly or persons with limited mobility are to be present in
the same area.
Do not place curtains, laundry, furniture etc, within a safe distance of 300mm of this appliance.
Do not attempt to burn rubbish on this appliance.
If this appliance is extinguished, on purpose or other, no attempt to relight should be made within 3 minutes.
This appliance incorporates a ODS Monitoring system. This is located on the front of the Burner and must not be
adjusted by the installer. This ODS Monitoring system must not be put out of operation, and if any parts require
changing, only original manufacturer parts shall be used.