background image

http://wwdmanuals.com/mru4-2

We appreciate your comments about the content of our publications.

Send comments to: [email protected]

Please reference publication MRU4-3.6-EN-G99

Woodward Kempen GmbH

Postfach 10 07 55 (P.O.Box) ∙ D–47884 Kempen (Germany)

Krefelder Weg 47 ∙ D–47906 Kempen (Germany)

Telephone: : +49 (0) 21 52 145 1

Internet: — www.woodward.com

Sales

Fax: : +49 (0) 21 52 145 354

Telephone: : +49 (0) 21 52 145 331

Email: : [email protected]

Service

Fax: : +49 (0) 21 52 145 354

Telephone: : +49 (0) 21 52 145 614

Email: : [email protected]

Woodward has company-owned plants, subsidiaries, and branches, as well as 

authorized distributors and other authorized service and sales facilities 

throughout the world.

Complete address / phone / fax / email information for all locations is 

available on our website.

Woodward Kempen GmbH reserves the right to update any portion of this 

publication at any time. Information provided by Woodward Kempen GmbH is 

believed to be correct and reliable. However, Woodward Kempen GmbH assumes no 

responsibility unless otherwise expressly undertaken.

Summary of Contents for HighPROTEC MRU4-2 G Series

























Reviews: