Woodward easYlite-200, Manual, Page: 20 / 34

Woodward strictly recommends to use power
supply that fulfills the SELV restrictions (SELV =
separated or safety extra-low voltage, see IEC)
Woodward recommends to use one of the fol‐
lowing slow-acting protective devices in the supply
line:
–
LPS
– Class 2
–
LVLE
– Listed DC fuse 4 A for 24 Vdc circuits
Fig. 6: Power supply connection to easyLite-200
No
.
Function Cable
Size
Description
1 DC input
B-
2.5mm 2
DC power supply negative pole.
2 DC input B
+
2.5mm 2
DC power supply positive pole.
Table 3: Power supply terminal assignment
3.5 Relay outputs
In
Ä
“Schematic and terminals” on page 20 below is shown the
connection of easyLite-200's relay output to an external signalling
device:
Fig. 7: Relay output
Schematic and terminals
Installation
Relay outputs
37903A easYgen Expansion Module | LED Lamp Expansion Module 20